54 Frequently Asked Questions for Lighted Mirrors WHAT IS THE BRIGHTEST LIGHTED MIRROR? The Radiance™ with perimeter lighting is the brightest mirror for task lighting due to the inward directional lighting that illuminates the face, followed closely by the larger Integrity™ lighted mirrors. The Silhouette™ emits a similar amount of light, but much of that light is directed towards the wall for wall glow, resulting in softer task lighting. CAN A LIGHTED MIRROR BE THE ONLY SOURCE OF LIGHT IN A BATHROOM? We recommend having overhead lighting in addition to lighted mirrors to create ideal conditions. HOW DO I MOUNT A LIGHTED MIRROR TO THE WALL? Lighted mirrors (other than the Radiance — see below) include two components: a metal chassis and a mirror face. To mount the chassis, use the provided mounting holes near the corners of the chassis to secure it to a structurally sound surface, such as wall studs. After the chassis is mounted and hardwired, hang the mirror face on the front of the chassis. HOW DO I MOUNT THE RADIANCE TO THE WALL? First, recess the included driver into the wall behind the mirror and mount it to a structurally sound surface such as wall studs. Next, mount the included wall cleat to the wall. Finally, connect the wiring and hang the Radiance on the cleat. CAN A LIGHTED MIRROR BE MOUNTED IN ANY ORIENTATION? No, the lighted mirror must be installed in the orientation listed (width x height) as the mirror hangs on a chassis. Contact us for a quote if a custom size is required; see page 116 for details. CAN A LIGHTED MIRROR BE MOUNTED ALL THE WAY TO THE CEILING? No, the lighted mirrors require a 1" clearance at the top to allow space for the mirror to lift on and off of the metal chassis. CAN THE LIGHTED MIRRORS BE RECESSED FLUSH WITH THE WALL? Lighted mirrors are meant to be surface mounted. To recess an Eternity™, Fusion™, or Integrity™ lighted mirror, ensure that the 1 / 4" mirror is proud of the wall and just the chassis is partially recessed. Make sure to leave a 1" clearance above the glass so the mirror can lift up for installation and maintenance. WHAT IS NEEDED FOR POWER FOR A LIGHTED MIRROR? The lighted mirror comes ready to hardwire for 120V-240V. The power whip should come through the back of the unit for the hardwire connection. A 36" long power whip can be prepared 12" down from the top of the mirror and centered from left to right. A quick disconnect is included so the wires can easily be connected. No J-Box is required. CAN THE LIGHTS BE REPLACED? The LEDs have a calculated L70 52,000-hour lifespan and will not likely need to be replaced for many years; however, they are designed to be easily replaceable, requiring only a Philips screwdriver. CAN ANY LIGHTED MIRROR BE UPGRADED WITH AVA? Ava™ SmartLook™ Technology was specifically created for makeup application and is available as an upgrade for the three models designed for task lighting with an enclosed chassis: Eternity, Fusion, and Integrity. Ava is not available for other models. QUESTIONS? CALL 888.368.1285 LIGHTED MIRRORS / FAQS PRODUCTS