76 Frequently Asked Questions for Mirrored Cabinets HOW CAN THE LIGHTED CABINETS BE DIMMED? The Ambiance™ can be dimmed with a 0-10V dimming switch. This requires a 120V unswitched hardwire connection to the cabinet, plus two sets of two wires from the cabinet to a 0-10V dimming switch (Leviton IP710-LFZ or equivalent; not provided). Multiple Ambiance cabinets cannot be controlled by the same switch, as each requires an independent circuit. The Ascension™ includes Keen™ technology for dimming the lights, see page 26. HOW DOES THE DEFOGGER WORK? The Ambiance and Ascension include a defogger. When the lights are on, the defogger will turn on, keeping an area of the mirror from fogging up. WHAT ARE THE POWER SPECIFICATIONS FOR MIRRORED CABINETS? Bring a 120V unswitched hardwire connection through the bottom back of the cabinet. For the Ambiance, run either two wires from the cabinet to an on/off switch or two sets of two wires to a 0-10V dimming switch. CAN I RECESS MOUNT MY MIRRORED CABINET? Yes, each cabinet comes ready for recess mounting and requires the following framed rough in: MIRRORED CABINETS / FAQS CAN I SURFACE MOUNT MY MIRRORED CABINET? Yes, all cabinets can be surface mounted with the purchase of the Surface Mounting Kit, which includes mirrored sides for the left and right, and two wall brackets. To order the surface mount wall brackets and not the mirror sides, order two model #10778-16.00 for $20 retail each. This may be necessary to surface mount two cabinets side by side, in which case order one surface mount kit and two wall brackets. Model #s: KIT-SM01 for 40" high cabinets - $220 retail KIT-SM02 for 36" high cabinets - $220 retail KIT-SM03 for 30" high cabinets - $220 retail Freight is $20 each. HOW DO I INSTALL TWO OR MORE MIRRORED CABINETS SIDE BY SIDE? Make sure there is a minimum 1/8" space between each cabinet to ensure proper clearance for the doors to open. Use the Ganging Kit upgrade to install two recessed cabinets side by side with a 1/8" gap between the doors. When recessing three or more cabinets, include a 1" wood strip between each and add 1" to the rough in width for the space between each cabinet. Model #s: KIT-GANG-30 for 30" high cabinets - $50 retail KIT-GANG-36 for 36" high cabinets - $50 retail KIT-GANG-40 for 40" high cabinets - $50 retail Freight is $10 each. CAN I INSTALL A MIRRORED CABINET SIDE BY SIDE WITH A LIGHTED MIRROR? Yes, however, the depths may vary, and there is no Ganging Kit for the different product types. HOW WIDE DOES THE DOOR SWING OPEN? The door opens up to a 165° angle. Purchase a clip to limit the opening to a 110° angle. Model #37459, $10 retail. QUESTIONS? CALL 888.368.1285. Units Model Rough-in Width Rough-in Height 1 30" 22.38" 28.63" 1 36" 22.38" 34.63" 1 40" 22.38" 38.63" 2 30" 45.75" 28.63" 2 36" 45.75" 34.63" 2 40" 45.75" 38.63" PRODUCTS